36" Big HO Scale two Lane Brick and steal Truss arch Bridge. CONECTABLE SECTIONS

Description: 36 inch total Length HO scale Bridge ORIGINALLY A CUSTOM ORDER FOR CUSTOMER. THIS IS A RED BRICK WITH STEAL ARCHES TRUSS BRIDGES. Up to 2 LANE HO 1:87 SCALE. BUT CAN BE SCALED FOR ANY SCALE. THIS WILL HAVE A STONE GRAY ON TOP. Can be used possibly for others scale like multiple lane N scale. Or for custom size or color changes message me and I can quote price after changes are made on software . THESE ARE MADE PER ORDER AND EACH 18 INCH SECTION TAKES 2 DAYS TO PRINT. SO WITH TWO SECTIONS IT CAN TAKE UP TO A WEEK POSSIBLY TO MAKE AND SHIP FROM TIME OF ORDER. CAN BE SOONER IF ITS NOT BUSY. COULD BE A BIT LONGER IF ITS VERY BUSY AND WAITING ON AN OPEN MACHINE. SEE THE FINE BRICK DETAIL. The measurements came from another customer. So of need changes me know. Price may change with any size changes. Look at measurements to make sure it fits your set up. As is this is 70mm wide, not including the rails. The rails come extra and are included, but will need glued on by the customer. THESE BRIDGE SECTIONS ARE CONNECTABLE AS SECTIONS. THE ENDS ARE SMOOTH TO FIT RIGHT UP AGAINST ANOTHER BRIDGE SECTION, SO YOU CAN BUY MULTIPLE BRIDGES TO MAKE ONE LARGE BRIDGE IF NEED. THE ENDS ARE HALF THE SIZE AS TYE CENTER BRICK PILLAR, SO THEY WOULD LOOK ALL THE SAME WHEN PUT WITH OTHER SECTIONS. This has to lay flat on heated bed plate when being made on 3D printer, so the rail fence cant be printed on the main bridge as is. THIS PURCHASE COMES WITH TWO 18 INCH BRIDGE SECTIONS, SO THE TOTAL LENGTH IS 26 INCHES, EACH SECTION IS 460mm long, 140mm tall, 70mm wide. again changes can be made some, as long as its not longer as this is made on my largest 3d printer and it can only be made up to 19 inches long per bridgesection. Its a long complicated print. Over 3 days of 3d printing just to make one sectuon and these are made per order so If you order one depending on if there are any other orders be made in front of your order on my large 3d printer, it will take at least 4 to 7 days to ship out from time of purchase. cost is 159.99 plus shipping. This is a 3D printed Truss Bridge, that us designed for HO scale 1:87 for one to Two Lane Train or Vehicle Bridge. or can be used for your custom needs. AGAIN PLEASE LOOK AT MEASUREMENTS TO SEE IF THIS WORKS FOR YOUR SET UP. Made by Spencer-3D. Its a very tedious process to 3D print and takes several hours to make. this four Lane Arch Bridge takes over 3 days just to make one. I can make custom parts or pieces as well. I make a lot of different stuff and I have recently got into making ho scale parts. I can make other types of Bridges, or I can make custom ho scale parts. Let me know. Fast shipping If ordered inside United States. I have thirteen 3D printers but only one is large enough to make this item, So it takes time to make. Length 460mm per section, two sections total for 920mm or 36 Inches Height 140mm not including railing Width 70mm Also included are four 18 inch HO scale Railing. Must be glued or attached on by the customer. Colors as is are silver and black top. I can make in other colors as well, or if want all in one color, I can do that as well. Everything is customizable.

Price: 135.99 USD

Location: Huntington, West Virginia

End Time: 2024-08-02T21:40:35.000Z

Shipping Cost: N/A USD