Description: The Latest Generation of Fuel Injector Tester and Cleaner Kit Four-Wire Dual-Channel Design: You can use it to test each injector individually, or both injectors at the same time, helping you diagnose injector problems and quickly confirm stuck, leaked, damaged, or burnt-out conditions. 8 Pulse Modes: Press the "MODE SET" button to select the required pulse signal output mode, the LED screen will display the currently selected mode, and the mode lock function can ensure test condition uniformity. 8 Pulse Modes (Mode 1 - Mode 8) Mode 0: Standby State, no output Mode 1: Single Pulse Low Power Mode: the fuel injector tester will send out a pulse with a pulse width of about 255 milliseconds. Mode 2: Short Pulse Low Power Mode: the fuel injector tester will send out 50 pulses with a pulse width of about 7 milliseconds. Mode 3: Long Pulse Low Power Mode: the fuel injector tester will send out 100 pulses, and the pulse width is about 3.5 milliseconds. Mode 4: Continuous Pulse Low Power Mode: the fuel injector tester will output pulses continuously, the pulse rate is about 50 pulses every 1450 milliseconds, and the pulse width is about 7 milliseconds. Mode 5: Single Pulse High Power Mode: the fuel injector tester will send out a pulse with a pulse width of about 255 milliseconds. Mode 6: Short Pulse High Power Mode: the fuel injector tester will send out 50 pulses with a pulse width of about 7 milliseconds. Mode 7: Long Pulse High Power Mode: the fuel injector tester will send out 100 pulses, and the pulse width is about 3.5 milliseconds. Mode 8: Continuous Pulse High Power Mode: the fuel injector tester will output pulses continuously, the pulse rate is about 50 pulses every 1450 milliseconds, and the pulse width is about 7 milliseconds. NOTE: During the pulse output period, the MODE SET button is invalid, and the working mode can only be selected by pressing the PULSE button again to terminate the output. Wide Application The fuel injector cleaning kit works with any fuel pressure tester. Working with the engine off, the pulse timer can be used with the fuel pressure gauge. This fuel injector test kit can be modified for relay testing or solenoid valve testing, and other modifications should be carried out under the guidance of professionals. Four Pulse Output Terminals You can use it to test each injector individually, or both injectors at the same time Alligator Clip The clip with strong bite force is not easy to fall off, providing you with a better experience. DC Input Port ( 12V ) Power supply : 12V battery or DC 12V (recommended 2A) power adapter Easy-To-Operate Fuel Injector Tester Pulse Tool 1. Turn off the car's engine. 2. Remove the wire plug of the vehicle injector to be tested, then connect the red pulse output terminal of the tester to the positive pole of the fuel injector, and the black pulse output terminal to the negative pole of the fuel injector. 3. Connect the red clip of the tester to the positive terminal of the 12V car battery, and connect the black clip to the negative terminal of the battery. 4. Press the "MODE SET" key to select the desired pulse signal output mode, and the screen will display the currently selected mode. 5. After selecting the desired pulse signal output mode, press the "PULSE" key, the instrument will output pulses to the automotive injector to be tested, and the signal indicator will light up when the pulses are output. 6. After the test is completed, if you need to repeat the test, you can press the "PULSE" button again. If you want to change the pulse mode, you need to disconnect the battery of the instrument and then reconnect it. NOTE 1. Wear approved safety goggles. 2. Only use this fuel injector cleaner in a ventilated place, do not inhale exhaust gas and steam from vehicles. 3. Before using this fuel injector cleaner, the car engine must be turned off. 4. Do not smoke or light a fire near the car. 5. Do not splash the fuel of the car on the hot engine parts. 6. Do not get close to any rotating (or moving) parts of the car, and do not touch any heat-generating parts of the car. 7. Do not short-circuit the positive and negative poles of the car battery. 8. Do not touch any auto parts with dangerous voltage.
Price: 28.99 USD
Location: Bordentown, New Jersey
End Time: 2025-01-24T09:48:06.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
Returns Accepted: Returns Accepted
Item must be returned within: 30 Days
Brand: LUTIFIX
Manufacturer Part Number: JHH70
Type: Fuel Injector Tester
Country/Region of Manufacture: China
Supported System: ABS
OBD Interface: OBDII
Warranty: 1 Year
Power Supply: 12V Battery or DC 12V (Recommended 2A)
Storage Conditions: -20°C-50°C; Relative Humidity: ≤85%
Working Conditions: 0°C-40°C; Relative Humidity: ≤80%
